Differences

This shows you the differences between two versions of the page.

--- blackburn:usingyourapplelaptop [2013/03/11 18:43] – mark
+++ blackburn:usingyourapplelaptop [2013/03/12 17:25] (current) – mark
@@ Line 1: / Line 1: @@
 ====== Using Your Apple Laptop ======
+<WRAP nopagebreak>
 The podium and front input panels both supply standard HDMI and VGA video ports and a 1/8-inch stereo audio port for connecting laptops and other devices to the Room AV system.
@@ Line 12: / Line 14: @@
 mini-DisplayPort to HDMI and mini-DisplayPort to VGA video adapters are stored in the Podium cabinet.
-{{ :blackburn:adapters.minidvi-vga.jpg?250|Apple mini-DP to VGA Adapter}}
+<WRAP right 510px>{{blackburn:adapters.apple.minidvi.png?500|Apple mini-DP Video Adapters}}</WRAP>
-{{blackburn:adapters.minidp-HDMI.jpg?250|Apple mini-DP to HDMI Adapter}}
+</WRAP><WRAP nopagebreak>
@@ Line 28: / Line 29: @@
   - If you are using a VGA cable (or if you have a pre 2010 laptop without DisplayPort audio support, connect the 1/8-inch stereo audio cable (integrated into the VGA cable) to your laptop's headphone port.
   - Turn on your laptop.
+</WRAP><WRAP nopagebreak>
 ==== Displaying Your Laptop Video ====
-{{ :blackburn:controls.crestron.source.laptop.png?390|Crestron Source Selection for Laptop}}
+<WRAP right 400px>{{blackburn:controls.crestron.source.laptop.png?390|Crestron Source Selection for Laptop}}</WRAP>
   - On the Crestron Panel, touch the blank or introductory screen to activate the Room AV System.
@@ Line 42: / Line 45: @@
     * ''**Send to Presenter Left Projector**'', or
     * ''**Send to Presenter Right Projector**''.
+</WRAP><WRAP nopagebreak>
 ==== Configuring Apple OSX to Use the Projectors ====
-{{ :blackburn:osx.displayprefs.png?250|OSX Display Preferences}}
+<WRAP right 400px>{{blackburn:osx.displayprefs.png?250|OSX Display Preferences}}</WRAP>
   - Configure your laptop to send a video signal to the projector
@@ Line 62: / Line 67: @@
         - Select the ''**Arrangement**'' tab, and
         - Select the ''**Mirror Displays**'' checkbox.
+</WRAP><WRAP nopagebreak>
 ==== Configuring Apple OSX to Use the Room Speakers ====
-{{ :blackburn:osx.soundprefs.png?250|OSX Sound Preferences}}
+<WRAP right 400px>{{blackburn:osx.soundprefs.png?250|OSX Sound Preferences}}</WRAP>
   - Configure your laptop to send an audio signal to the room speakers
@@ Line 80: / Line 87: @@
       - Select the device with type **Internal Speakers**.
+</WRAP><WRAP nopagebreak>
@@ Line 88: / Line 96: @@
   * Disconnect the video and audio cables from your laptop.
   * Return any Presentation Aids borrowed from the room to their storage locations.
+</WRAP>